blum undermount drawer slides installation instructions

#Blum undermount drawer slides installation instructions how to
#Blum undermount drawer slides installation instructions professional

Subtract the thickness of the drawer slides from the width of the opening.

Measure the thickness of both drawer slides (usually 1', but can vary depending on the manufacturer).

Measure the width of the opening from left to right.

It involves a little bit of math, but you can do it! The front and back size is determined by the width of your cabinet opening, as well as the thickness of the drawer slides and the sides. The sides should match the length of the drawer slides, and should be at least an inch shorter than the depth of the cabinet. Your cabinet will probably differ in size, so follow the guidelines below to figure out your own measurements. This drawer will fit in a cabinet that measures 16' wide and at least 21' deep.Īll the boxes in these example are using 1圆 boards for the sides, front and back to create a drawer box that is 5 ½' high, 15' wide and 20' long.

In the examples below, I'm going to use the same 3D model of an overlay drawer with standard ½' thick side-mount drawer slides for all three methods. If the measurements aren't exactly the same, your drawer isn't square and it won't fit properly. Make sure your drawer box is square! Measure from corner to corner across the box at a diagonal in both directions.Not only does this look better when viewed from the side, but it also provides the shear strength necessary to withstand years of use. Assemble your drawer with the front and back between the sides.Use the smallest measurement when planning your box dimensions. Take the measurements from a few different locations in case it varies from one side to the other. Measure the front opening of the cabinet, as well as the depth.You don't want the bottom of your drawer to fall out! Some drawer building methods are better suited for heavy items. Think about how much weight your drawer will hold.

#Blum undermount drawer slides installation instructions professional

This will make the boards look like solid wood, and give your drawer a more professional look. If you're using plywood for the sides, apply edge banding before you start assembly.Every drawer slide will have a different set of installation instructions, which will dictate the width of the drawer. The most common type of drawer slides are side-mounted, but undermount drawer slides are becoming more popular. Decide what type of drawer slides you'll use before you start building.

You can learn more about the difference between these two types in this article about the parts of a cabinet. This will change the length of the drawer.

Decide whether you want inset drawers or overlay drawers first.

No matter which method you use, these principles will always apply.

#Blum undermount drawer slides installation instructions how to

How to Make a Replaceable Captured Bottom.How to Build a Drawer with a Captured Bottom.How to Build a Drawer with a Recessed Bottom.How to Build a Drawer with a Nailed on Bottom.